| INPUT |
| Voltage | 115/230 VAC ± 15% |
| Frequency | 50/60 Hz ± 5% |
| Fuse | 2A Slow-Blo 250V AC |
| Line condition |
| Power Switch | Reverse polarity switch for normal condition （on / off / auto setting） |
| Neutral Switch | Neutral switch on/off selection for single fault condition |
| Ground Switch | Ground switch on/off selection for class I single fault condition |
| Probe Setting |
| Surface to Surface （PH- PL） |
| Surface to Line（PH - L） |
| Ground to Line （G - L） |
| Ground to Neutral （G - N） |
| Auto Function （G - N & G - L） |
| SETTING |
| Touch Current High Limit （RMS） | Range: | 0.0uA~ 999.9uA/ 1000uA~5999uA/ 6.00mA~20.00mA |
| Resolution: | 0.1uA/1uA/0.01mA |
| Touch Current Low Limit （RMS） | Range: | 0.0-999.9 uA |
| Resolution: | 0.1uA |
| Touch Current High Limit （Peak） | Range: | 0.0uA - 999.9uA/ 1000uA - 9999uA/ 10.0mA - 30.0mA |
| Resolution: | 0.1uA/1uA/0.1mA |
| Touch Current Low Limit （Peak） | Range: | 0.0-999.9 uA |
| Resolution: | 0.1uA |
| DISPLAY |
| Touch Current Display （RMS） | Range 1 | 0.0uA~ 999.9uA, frequency DC - 1MHz |
| Resolution | 0.1uA |
| Accuracy | DC : ±2% of reading + 3counts
15Hz < f <100KHz : ±2% of reading + 3counts
100KHz < f < 1MHZ : ±5% of reading （10.0uA - 999.9uA） |
| Range 2 | 1000uA~8500uA, frequency DC - 1MHz |
| Resolution | 1uA |
| Accuracy | DC : ±2% of reading + 3counts
15Hz < f <100KHZ : ±2% of reading + 3counts
100KHz < f <1MHZ : ±5% of reading （10uA - 8500uA） |
| Range 3 | 8.00mA~20.00mA, frequency DC - 1MHz |
| Resolution | 0.01mA |
| Accuracy | DC : ±2% of reading + 3counts
15Hz < f < 1MHz : ±5% of reading （0.01mA -20.00mA ） |
| Touch Current Display （Peak） | Range 1 | 0.0uA~ 999.9uA, frequency DC - 1MHz |
| Resolution | 0.1uA |
| Accuracy | DC : ±2% of reading +2uA
15Hz < f <1MHZ : ±10% of reading +2uA |
| Range 2 | 1000uA ~ 8500uA, frequency DC - 1MHz |
| Resolution | 1uA |
| Accuracy | DC : ±2% of reading +2counts
15Hz < f <1MHz : ±10% of reading +2counts |
| Range 3 | 8.0mA ~ 30.0mA, frequency DC - 100KHz |
| Resolution | 0.01mA |
| Accuracy | DC : ±2% of reading +2counts
15Hz < f < 100KHz : ±10% of reading +2counts |
| Measuring Device Module |
| MD1 | IEC60990 Fig4 U2, IEC 60950-1, IEC60335-1, IEC60598-1, IEC60065, IEC61010 |
| IEC60990 Fig4 U1, IEC60065 |
| MD2 | IEC60990 Fig5 U3, IEC60598-1 |
| IEC60990 Fig5 U1 |
| MD3 | IEC 60601-1 |
| MD4 | UL544NP, UL484 , UL923, UL471, UL867, UL697 |
| MD5 | UL544P |
| MD6 | UL1563 |
| MD7 | IEC60950, IEC61010-1 FigA.2 （2K ohm） for RUN Test MD Circuit. |
| External MD | Basic measuring element 1k ohm |
| MD Voltage Limit | 70Vdc |
| Leakage Current Offset | Range: | 0 - 999.9uA |
| Resolution: | 0.1uA |
| DUT POWER |
| AC Voltage | 0.0-277.0V |
| AC Current | 40Arms max continuous |
| Over Current Protection | 50Arms, Response Time < 3 sec / 250Apeak Response Time <10u sec |
| AC Voltage High/Low Limit | Range: | 0.0-277.0V |
| Resolution: | 0.1V/step |
| AC Voltage Display | Range: | 0.0 - 277.0 V |
| Resolution: | 0.1 volt / step |
| Accuracy: | ±（1.5% of reading + 2 counts） , 30.0 - 277.0VAC |
| Delay time setting | Range: | 0.2 !V 999.9 seconds |
| Resolution: | 0.1 second |
| Timer display | Range: | 0.0 !V 999.9 seconds |
| Resolution: | 0.1 second |
| Accuracy: | ± （0.1% of reading + 0.05 seconds） |
| GENERAL |
| PLC Remote Control | Input - Test, Reset, Interlock & Recall File 1 through10 |
| Output - Pass, Fail, Test-in-Process, Start-Out, Reset-Out |
| Scanner Control | It is applied to control Matrix Scanner （Model 7006） |
| Memory | 50 memories , 30steps per each memory . Max. Result Display 900 data （30 memories x 30 steps） |
| Auto Reverse Function | AUTO Reverse ON / OFF parameter setting selection
Automatic Reverse polarity switch for normal condition in one step setting menu.
Only display maximum leakage current value. |
| Scope Output Interface | At rear panel BNC type to connet scope for some IEC standards test requirement and application. |
| Display | 320 X 240 graphic LCD |
| LCD Contrast Setting | Range: 1-9; 1 is lightest character, 9 is darkest character. |
| Alarm Volume Setting | Range: 0-9; 0=OFF, 1 is softest volume, 9 is loudest volume. |
| Security | Lockout capability to avoid unauthorized access to test set-up programs. |
| Calibration | Software and adjustments are made through front panel,
Automatic Calibration alert function to signal operator when calibration is due. |
| Results Display | All test result information will be displayed on the screen. |
| Interface | RS232 standard |
| Safety | Product with TUV/GS certificate |
| Dimension | 430 （W） x 133（H） x 300 （D） mm |
| Weight | 12 Kg |
| STANDARD ACCESSORIES |
| Power Cord | X1 |
| Fuses | X2 （Including a spare contained in the fuse holder） |
| Interlock Disable Key（1505） | X1 |
| Hipot Test Lead for PH / PL （1101） | X2 |
| RS232 Link Cable 1.5m（1130） | X1 |
| DUT Power Cable 40A（1148） | X1 |
| RUN Module （Opt.752） |
| W | Range : 0-1KW / 1-10KW Resolution : 0.5W / 5W |
| A | Range : 0.000 !V 3.500 A / 3.00 - 40.00A , Resolution : 0.001A / 0.01A |
| PF | 0.000 -1.000 |
| Leakage Current | Range : 0.00 - 10.00mA , Resolution : 0.01mA |
| AC Current High/Low Limit Setting | Range: | 0-40A |
| Resolution: | 0.01A/step |
| AC Current Display | Range: | 0.000 !V 3.500 A / 3.00 - 40.00A |
| Resolution: | 0.001A / 0.01A |
| Accuracy : | ± （2 % of reading + 5 counts） / ± （2 % of reading + 2 counts） |
| AC Power High/Low Limit Setting | Range: | 0 - 10KW |
| Resolution: | 1W |
| AC Power Display | Range: | 0.0 -1000.0W / 1000 - 10000W |
| Resolution: | 0.5W / 5W |
| Accuracy : | ±（2 % of reading + 2 counts ） |
| Power Factor High/Low Limit Setting | Range: | 0.000 - 1.000 |
| Resolution: | 0.001 |
| Power Factor Display | Range: | 0.000 - 1.000 |
| Resolution: | 0.001 |
| Accuracy : | ± （2 % of reading + 2 counts ） |
| Leakage Current High/Low Limit Setting | Range: | 0.00 - 10.00mA |
| Resolution: | 0.01mA |
| Leakage Current Display | Range: | 0.00 - 10.00mA |
| Resolution: | 0.01mA |
| Accuracy : | ± （2 % of reading + 2 counts ） |
| Delay Timer Setting | Range: | 0, 0.2 - 999.9 |
| Resolution: | 0.1 |
| Dwell Timer Setting | Range: | 0, 0.1-999.9 （0=continuous） |
| Resolution: | 0.1 |
| Timer display | Range: | 0.0 - 999.9 seconds |
| Resolution: | 0.1 second |
| Accuracy: | ± （0.1% of reading + 0.05 seconds） |
| Power Control | It is applied to control Transformer Box （1931/1931S） or AC Power Source（6700/6800/6400 Series） |
| HV & GB Link Module （Opt. 753） |
| Max. ACW 4000VAC, DCW 4000VDC & Max. Ground Bond 40A |
| GPIB Interface Card （Opt. 731） |
| Printer Port Interface Card （Opt. 732） |
| Multi-function Interface Card （Opt. 751） |
| Including USB port A type, combination of RS-232, RS-485 port, and Bar Code Input with internal memory capability. |
| High Measurement Range 35mArms / 70mApeak & 4MDs （Opt. 754 ） |
35mArms / 70mApeak for IEC60990 fig4（U1 and U2）, IEC60990 fig5（U1 and U3）, UL484, IEC60601 Test Requiremt ,
Notice : Option this MD circuit have to replace MD module all MD circuits . |
| Transformer Box （Option） Add this option must optional Opt.752 RUN Module. |
1931 Series Transformer Box
（500VA/ 1KVA/1.8KVA/3.6KVA） | Multi-Tape of 1.0, 1.06, 1.1 times of input voltage. |
1931-S Series Transformer Box
（500VA/ 1KVA/1.8KVA/3.6KVA） | Multi-Tape of 0.8, 0.85, 0.9, 1.0, 1.06, 1.1 times of input voltage. |
| AC Power Source （Option） Add this option must optional Opt.752 RUN Module. |
| 6800 Series Digital AC Power Source （6805, 6810 , 6820 , 6830 and 6840 ） |
| 6700 Series Programmable AC Power Source （6705, 6710 , 6720 , 6730 and 6740 ） |
| 6400 Series AC Power Source （6402, 6403, 6405, 6410 ） |
